ARROW/OTK/KR Baseline Setups

Struggling with kart setup in your senior kart? try our Baseline setup for these three major kart brands. Setups are quite neutral and are a great starting point if you find yourself struggling at the track. Please note that these setups are starting points only, and may need to be altered depending on track and weather conditions, and other variables. When adjusting the setup of your kart, it is best to make only one change at a time before testing the change.

KART REPUBLIC/FA/DAP SENIOR KART

  • 2-4mm per side negative camber
  • 1mm per side toe out 
  • Slightly increased castor 8-9mm
  • 15mm front spacers
  • All front crash bars loose
  • Nylon blade front bar
  • Standard slotted AMV rims
  • Low front ride height.
  • Standard Jecko Seat (1060mm middle of left king pin to middle top of seat, flush with bottom rails)
  • Medium axel 1m
  • 1395 rear track 
  • Standard rear ride height
  • Rear crash bar loose
  • Side pods loose  

ARROW X7 SENIOR

  • 2mm per side negative camber 
  • 1mm per side toe out 
  • Neutral castor (top and bottom dots forward)
  • 20mm front spacers
  • Front crash bars tight
  • Chrome front bar
  • MXC rims
  • Low front ride height
  • Jecko standard seat (120mm from front of axel to back of seat on a 45 degree angle, 2-3mm below rail.)
  • Medium axel 1m
  • 1395 rear track 
  • Standard rear ride height
  • Rear crash bar loose
  • Rear side pod bolts only tight
  • No seat stays

OTK SENIOR

  • 4mm per side negative camber
  • 1mm per side toe out
  • Neutral castor (Both arrows forward)
  • 15mm front spacers
  • Flat torsion bar
  • Front crash bars loose
  • MXC rims
  • Central front ride height
  • Tillet T11vg Seat (125mm from front of axel to back of seat on 45degree angle, 2-3mm below rail)
  • N axel 1m
  • 1395 rear track
  • Standard rear ride height
  • Rear crash bar loose
  • Side pods loose 
  • 1 seat stay per side

 

Back to blog